Skip to content
  • Support
  • Permanently Pair a 2nd Wireless Headset to Your Base

Permanently Pair a 2nd Wireless Headset to Your Base

  1. Remove the primary headset, leave it turned Off, and set it aside.
  2. Set your base to Phone mode.
  3. Flip the base over and press and hold the “+” mic volume. When the base flashes purple and the Phone mode starts blinking, let go.
  4. Press and hold the On/Off button on the secondary headset to be paired. When it flashes blue, let go. It will begin to flash purple.
  5. When the Phone light goes solid and the base and headset have stopped flashing, you’re done!
  6. Both the primary and secondary headset will be synced, and have call control (if you have an EHS/lifter).
  7. Secondary headset will remain paired until you pair it back to another base.

Compare headsets

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare